WILLITS TECHNICAL SETUP



Live Performance

AUDIO + VIDEO NEEDS :

  • 16in x 32in Table table. 6ft across with a black tablecloth that reaches the floor
  • Grounded power with one 6 output power strip (110-240v)
  • Two 1/4in cables to connect Willits' audio interface to DI's or house system (see input list below).
  • One SM58 mic, boom stand with mic clip, and one XLR cable to connect mic to Willits' audio interface.
  • Panned stereo monitor mix (very important, no mono monitoring).
  • Quality sound system
  • 1 hour sound/image check prior to performance.
  • 1 quality video projector with VGA input (5000+ lumen DLP)
  • HDMI video output from Willits' laptop / MacBook Pro Retina on stage to mounted projector
  • Smooth reflective projection surface (15-20 Ft. across min - larger is better)

INPUT LIST :

  • 1L and 2R - Submixer or two DI's
  • There are two 1/4in lines out from Willits' audio interface
  • The XLR from the vocal mic will input into Willits' audio interface for processing, not the submixer


Download Full-Res 2015 Tech Setup

Image of Setup (minus mixers on stands)


DJ SET SETUP

AUDIO NEEDS :

  • DJ booth OR 16in x 32in Table table. 6ft across with a black tablecloth that reaches the floor
  • Grounded power with one 6 output power strip (110-240v)
  • DJ mixer

INPUT :

  • Two 1/4in line input to DJ mixer